Desktop-Bau

Maple strips were joined around the permiter of the desktop to create a flat and thin but rigid surface.

A 1" x 3" maple strip at the rear of the desktop, joined with biscuits and glue, prevents the desktop from bending under pressure. Three-quarter inch strips around the remaining sides hide the plywood edges, provide a durable and rounded edge and flatten the plywood sheet. The slight bend in the raw plywood sheet disappeared after this edge treatment was applied.

 

December 19th, 2010 Posted by Jon Jaroker Abgelegt in: Bau

Seien Sie den ersten Kommentar. Hinterlasse einen Kommentar

Ihre E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert *