Якщо не скоротити з ЧПУ, повнорозмірні фанера громіздкими і повинні бути грубо скоротити на більш дрібні шматки. For fast and accurate cutting, I created a saw and router cutting guide using MDF and an aluminum angle. One side of this guide…
Читати далі → 
Perfect right angles and parallel lines are easily created using a compass and straightedge. They are essential for large pieces such as the desktop, where distance amplifies errors. Here is how I marked perfect rectangles in preparation for cutting. Draw…
Читати далі → 
A cutting sled is used for safe, accurate and repeatable cuts using a low-cost, portable table saw. The saw’s cutting top is improved using metal angles that are c-clamped to the table’s sides. The saw table itself is secured to…
Читати далі → 
Maple strips were joined around the permiter of the desktop to create a flat and thin but rigid surface. A 1″ x 3″ maple strip at the rear of the desktop, joined with biscuits and glue, prevents the desktop from…
Читати далі → 
The cabinet legs were constructed from wood strips that were rabbeted and glued together. A leveling glider is screwed into the bottom. A threaded bolt at the top secures the leg to the cabinet.
Читати далі → 
